 |
|
|
|
|
|
|
 |
|
|
|
Product Information
|
|---|
| J-B Weld Epoxy Steel Resin and Hardener |
| paste |
Arts & Crafts » multipurpose » Adhesive
Home maintenance » multipurpose » Adhesive
Inside the Home » multipurpose » Adhesive
|
| 800-529-3530 |
| 2011-03-17 |
| 2011-03-17 |
| Products with similar usage in this database |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
|
|
|
|
Health Effects
|
|
|---|
| Use with adequate ventilation. Avoid contact with eyes and skin. Avoid breathing vapors. Do not flame, cut, braze weld or melt emptycontainers. Keep the product away from heat, open flame, and other sources of ignition. Avoid contact with strong acids, alkalis and oxidizers. |
| From MSDS:Health HazardsPotential Health EffectsEye contact: Contact with eyes can cause severe irritation, redness, tearing, blurred vision, and/or swelling. May cause eye damage.Skin contact: Contact with skin can cause irritation, (minor itching, burning and/or redness), Dermatitis, defatting may be readily absorbed through the skin.Inhalation: Inhalation of vapors can cause nasal and respiratory irritation, dizziness, weakness, fatigue, nausea, headache, possible unconsciousness and/or asphyxiation. Aspiration of material into lungs may result in chemical pneumonitis which can be fatal.Ingestion: Ingestion can cause gastrointestinal irritation, nausea, vomiting, diarrhea. |
| From MSDS:Overexposure to this material has apparently been known to cause the following effects in lab animals: Eye damage, skin damage. |
| Product does not contain carcinogens. |
| Inhalation: If inhaled, remove victim from exposure to a well-ventilated area. Make them comfortably warm, but not hot. Use oxygen or artificial respiration as required. Consult a physician.Skin contact: For skin contact, wash promptly with soap and excess water.Eye contact: For eye contact, flush promptly with excess water for at least fifteen minutes. Consult a physician.Ingestion: If ingested, do not induce vomiting. Give victim a glass of water. Call a physician immediately. |
| 2 |
| 1 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-17 |
| 2004-05-17 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| Use with adequate ventilation. Avoid contact with eyes and skin. Avoid breathing vapors. Do not flame, cut, braze weld or melt emptycontainers. Keep the product away from heat, open flame, and other sources of ignition. Avoid contact with strong acids, alkalis and oxidizers. |
| Dispose of in accordance with local, state, and federal regulations. |
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
