The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
From Website Tech Data
ARDEX S 1-K is a polymer dispersion material. Avoid eye and skin contact. KEEP OUT OF REACH OF CHILDREN. Carefully read and follow all cautions and warnings on product label. For complete safety information, please refer to the Material Safety Data Sheet or visit our website at www.ardex.com.
Physiologically and ecologically friendly when set. Never mix with cement or additives other than Ardex approved products. Observe the basic rules of concrete work. Do not install below 50 deg F or above 85 deg F surface temperature.
Tools should be cleaned with water immediately after use.
As always, Ardex recommends the installation of test areas to confirm the suitability of the product for the intended use.
ARDEX S 1-K must be worked at surface temperatures between 50 deg F and 85 deg F.
ARDEX S 1-K is for use in residential and light commercial interior applications only. For other waterproofing applications, please refer to the Ardex Technical Brochures about ARDEX 8+9 WATERPROOFING COMPOUND or ARDEX S 2-K HIGH PERFORMANCE TWOCOMPONENT
Acute Health Effects:
Health Hazard Data
Route(s) of Entry
Ingestion? DO NOT INGEST.
Health Hazards (Acute and Chronic)
Signs and Symptoms of Exposure
Medical Conditions Generally Aggravated by Exposure