 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Product Information
|
| Loctite PL Premium Advanced Polyurethane Construction Adhesive |
| paste |
Home maintenance » multipurpose » Adhesive
Home maintenance » construction » Adhesive
|
| 800-321-1733 |
| 2011-02-10 |
| 2011-03-11 |
| Products with similar usage in this database |
|
|
 |
 |
 |
 |
 |
|
Manufacturer
|
| Henkel Consumer Adhesives |
| Div., The Henkel Group |
| 7405 Production Drive |
| Mentor |
| OH |
| 44060 |
| 440-255-8900 |
| 800-624-7767 |
| 2011-04-28 |
| Products by this manufacturer |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
| Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Avoid extreme temperatures. Use only with adequate ventilation. For safe storage, store at or above 20 degrees C (68 degrees F) Below temperature limit the product properties will change. Keep container closed. Keep in a cool, well ventilated area. |
| From MSDS:Hazards IdentificationEmergency Overview: May cause allergic skin and respiratory reaction. Causes skin irritation Causes respiratory tract irritation. This product may be severely irritating to the eyes. Contains material which can cause cancer.Relevant routes of exposure: Inhalation, Skin contact, Eyes, Ingestion.Potential Health EffectsInhalation: Contains crystalline silica (quartz), which is classified as a possible carcinogen. However, the crystalline silica present in this product is encapsulated in the liquid and will only be liberated if the product is sanded or abraded, and even then what is liberated will not be pure crystalline silica. Appropriate precautions, however, should be taken if the product is sanded or abraded to prevent personnel from breathing the dust. May cause sensitization by inhalation and skin contact. Moderate respiratory tract irritation. Exposure to diisocyanates may cause the following human health effects: Skin irritation and allergic reactions, respiratory irritation, respiratory sensitization and lung toxicity; some diisocyanates also may cause cancer. The likelihood that these effects will occur depends on a number of factors; among them the level of exposure, frequency of exposure, part of body exposed and sensitivity of the exposed individual. Persons suffering from allergic reactions to isocyanates should avoid contact with the product.Skin contact: Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals. This product may discolor the skin.Eye contact: Causes eye irritation.Ingestion: Do not taste or swallow.Existing conditions aggravated by exposure: Pre-existing skin or lung allergies may increase the chance of developing exaggerated allergic symptoms from exposure to this product. |
| From MSDS:No information provided. |
| Components of this productare listed as carcinogens by IARC and NTP. |
| Inhalation: Move to fresh air. If symptoms persist, seek medical advice.Skin contact: Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes.Eye contact: In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.Ingestion: Do not induce vomiting, seek medical advice immediately.Notes to physician: There is no specific antidote.An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate.The physician's judgment should be used to control symptoms and clinical condition based on the individual reactions of the patient. |
| 2* |
| 1 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-02-10 |
| 2010-03-26 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Avoid extreme temperatures. Use only with adequate ventilation. For safe storage, store at or above 20 degrees C (68 degrees F) Below temperature limit the product properties will change. Keep container closed. Keep in a cool, well ventilated area. |
| Dispose of according to Federal, State and local governmental regulations. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|