 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Product Information
|
| Loctite Super Glue Professional |
| liquid |
Arts & Crafts » super glue » Adhesive
Home maintenance » super glue » Adhesive
Home Office » super glue » Adhesive
Inside the Home » super glue » Adhesive
|
| 800-321-1733 |
| 2011-03-10 |
| 2011-03-12 |
| Products with similar usage in this database |
|
|
 |
 |
 |
 |
 |
|
Manufacturer
|
| Henkel Consumer Adhesives |
| Div., The Henkel Group |
| 7405 Production Drive |
| Mentor |
| OH |
| 44060 |
| 440-255-8900 |
| 800-624-7767 |
| 2011-04-28 |
| Products by this manufacturer |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
| Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Avoid contact with fabric or paper goods. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors, and cause thermal burns.Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. |
| From MSDS:Hazards IdentificationEmergency Overview: Bonds skin in seconds. May cause eye and respiratory tract irritation. Combustible liquid and vapor.Relevant routes of exposure: Skin contact, Inhalation, Ingestion.Potential Health EffectsEye contact: Irritating to the eyes. Causes excessive tearing. Eyelids may bond.Skin contact: Bonds skin in seconds. May cause skin irritation. Cyanoacrylates have been reported to cause allergic reaction but due to rapid polymerization at the skin surface, an allergic reaction is rare. Cyanoacrylates generate heat on solidification. In rare circumstances, a large drop will burn the skin. Cured adhesive does not present a health hazard even if bonded to the skin.Ingestion: Not expected to be harmful by ingestion. Rapidly polymerizes (solidifies) and bonds in mouth. It is almost impossible to swallow.Inhalation: Exposure to vapors above established exposure limit results in respiratory irritation which may lead to difficulty in breathing and tightness in the chest. |
| From MSDS:No information provided. |
| No information provided. |
| Eye contact: Immediately flush with plenty of water for at least 15 minutes. Get medical attention. If eyelids are bonded closed, release eyelashes with warm water by covering with a wet pad. Do not force eye open. Cyanoacrylate will bond to eye protein and will cause a lachrymatory effect, which will help to debond the adhesive. Keep eye covered until debonding is complete, usually within 1-3 days. Medical attention should be sought in case solid particles of polymerized cyanoacrylate trapped behind the eyelid cause abrasive damage.Skin contact: Do not pull bonded skin apart. Soak in warm soapy water. Gently peel apart using a blunt instrument. If skin is burned due to the rapid generation of heat by a large drop, seek medical attention. If lips are bonded, apply warm water to the lips and encourage wetting and pressure from saliva in mouth. Peel or roll lips apart. Do not pull lips apart with direct opposing force.Ingestion: Ensure breathing passages are not obstructed. The product will polymerize rapidly and bond to the mouth making it almost impossible to swallow. Saliva will separate any solidified product in several hours. Prevent the patient from swallowing by separating mass.Inhalation: Remove to fresh air. If discomfort persists seek medical attention. |
| 2 |
| 2 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-10 |
| 2010-03-17 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. Avoid contact with fabric or paper goods. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors, and cause thermal burns.Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. |
| Dispose of according to Federal, State and local governmental regulations. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|