 |
|
|
|
|
|
|
 |
|
|
|
Manufacturer
|
|---|
| Medtech |
| Name change to Prestige Brands, Inc. |
| 3510 N. Lakecreek Drive |
| Jackson |
| WY |
| 83001 |
| 307-733-1680 |
| 307-733-0393 |
| 2009-03-06 |
| Products by this manufacturer |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
|
|
|
|
|
Health Effects
|
|
|---|
Warning:
For external use only
flammable
keep away from fire or flame
Do not use in the eyes, over large areas of the body, longer than one week unless directed by a doctor, on infected areas or wounds that are draining, with other first aid products such as lotions and creams, over sutures, or mucous membranes.
Ask a doctor before use if you have deep puncture wounds, deep cuts, animal bites, serious bleeding, diabetes, poor circulation, and serious burns.
When using this product do not store at temperatures above 120 degrees F. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal
Stop use and ask a doctor if condition persists or gets worse, infection occurs.
Keep out of reach of children. If swallowed, get medical help or call a Poison Control Center right away.
|
From MSDS
HEALTH HAZARD DATA
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Headache, lethargy, drowsiness, weakness, difficulty walking, personality change, poor appetite, nausea and weight loss. Prolonged exposure to vapors in concentrations in excess of TLV can cause damage to kidneys, blood and nervous system.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Liquid may cause eyes to become irritated, prolonged exposure to skin may cause drying and cracking.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Prolonged absorption of material through skin could cause damage to blood, kidneys and nervous system.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: Headache, lethargy, drowsiness, weakness, difficulty walking, personality change, poor appetite, nausea and weight loss.
HEALTH HAZARDS (ACUTE AND CHRONIC): Vapor irritating to eyes, nose and throat. Liquid irritating to eyes and skin. Prolonged and repeated exposure to vapor concentrations in excess of TLV or through prolonged absorption through skin may cause damage to blood, kidneys and nervous system.
|
From MSDS
HEALTH HAZARDS (CHRONIC): Prolonged and repeated exposure to vapor concentrations in excess of TLV or through prolonged absorption through skin may cause damage to blood, kidneys and nervous system.
|
From MSDS
CARCINOGENICITY: NTP?- NO IARC MONOGRAPHS?- NO OSHA REGULATED? -NO
|
From MSDS
Emergency and First Aid Procedures:
Inhalation: Remove victim to fresh air. If not breathing, give artificial respiration. Give oxygen if breathing is difficult. Get professional medical attention immediately.
Eye or skin contact: Immediately flush with plenty of fresh water. Remove contaminated shoes and clothing. Get medical attention.
|
| N |
| N |
| N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1969-12-31 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
From MSDS PRECAUTIONS FOR SAFE HANDLING AND USE STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Immediately eliminate all possible sources of ignition. Use an appropriate absorbent. Large spills may be flushed into a suitable containment area with water. Do not use ferrous tools to scrape material from floor or other surfaces. See below. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep containers tightly closed, cool, dry and away from sources of heat, sparks, and ignition. Remember; dry nitrocellulose is extremely flammable; avoid accumulating large quantities of dry resin. Dry resin may ignite from sparks, flame, friction or impact. Use with adequate ventilation OTHER PRECAUTION: Use only non-sparking tools.
|
From MSDS Disposal of this material is regulated by federal, state, and local hazardous waste regulations. Please consult appropriate agencies for current information. Hazardous liquids must be incinerated, any solid absorbent or residual material reco
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
