 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
|
|
|
Health Effects
|
|
|---|
From MSDS
HEALTH HAZARD DATA
Route(s) of Entry: Inhalation (Y); Skin (Y); Eye (Y); Ingestion (Y)
Health Hazards: Acute:
Inhalation - No significant adverse health effects are expected to occur upon short-term exposure.
Eye – Transient, mild irritation with short-term contact with liquid sprays or mists.
Skin - Mild, transient skin irritation with short-term exposure.
Ingestion – If swallowed, large volumes of material can cause generalized depression, headache, drowsiness, nausea, vomiting, and diarrhea. Smaller doses can cause laxative effect. If aspirated into the lungs, liquid can cause lung damage.
Signs and Symptoms of Exposure:
Inhalation – N/A
Eye – Stinging, watering, redness, and swelling.
Skin – Contact with hot material may result in severe burns.
Ingestion – Can cause a laxative effect.
Medical Conditions Generally Aggravated by Exposure: Pre-existing skin disorders.
|
From MSDS
Prolonged or repeated skin contact can cause mild irritation and inflammation characterized by drying, cracking (dermatitis), or oil acne. Repeated or prolonged inhalation of petroleum-based mineral oil mists at concentrations above applicable workplace exposure levels can cause respiratory irritation and other pulmonary effects.
|
From MSDS
NTP (N); IARC Monographs (N); OSHA Regulated (N)
|
From MSDS
Inhalation - In case of overexposure, move victim to fresh air.
Eye - Remove contact lenses if any. Flush eyes with cool, clean, low-pressure water while occasionally lifting and lowering eyelids. Seek medical attention if excessive tearing, redness, or pain persists.
Skin - Remove contaminated clothing and shoes. Wipe off excess material from skin. Wash exposed skin area with mild soap and water. Seek medical attention if tissue appears damaged or irritation persists. If material is injected under the skin, into the muscle or into the bloodstream, seek medical attention immediately.
Ingestion - DO NOT INDUCE VOMITING. Do not give anything to drink unless directed to by a physician. Never give anything by mouth to a person who is not fully conscious. Seek medical attention immediately.
|
| 1 |
| 1 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2004-03-09 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
From MSDS
Avoid water contamination and extreme temperatures to minimize product degradation. Empty containers may contain product residue that can ignite with explosive force. Do not pressurize, cut, weld, braze, solder, drill, grind or expose empty containers to flames, sparks, heat or other potential ignition sources. Keep container closed when not in use. Do not store with strong oxidizing agents. Do not store at temperatures above 120
|
From MSDS
User to determine if material is a hazardous waste at time of disposal. Transportation, treatment, storage, and disposal of waste material must be conducted in accordance with RCRA regulations. State and/or local regulations may be more restr
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
