 |
|
|
|
|
|
|
 |
|
|
|
Product Information
|
|---|
| GE Silicone I Window & Door Caulk, GE412A, Bronze |
| paste |
Home maintenance » window/door » Caulk
Home maintenance » silicone » Caulk
Home maintenance » multipurpose » Sealant
|
| 866-275-4372 |
| 2011-03-29 |
| 2011-03-30 |
| Products with similar usage in this database |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
|
|
|
|
Health Effects
|
|
|---|
| Use only in well-ventilated areas. Avoid contact with skin and eyes. Eye irritation on contact with the uncured product. Skin irritation is possible after contact with the uncured product. Caution! Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the fingertips, nails and cuticles. Residual sealant may remain on fingers for several days and transfer to lenses and cause severe eye irritation. Product releases acetic acid during application and curing.Store away from heat, sources of ignition, and incompatibles. |
| From MSDS:Hazards IdentificationEmergency Overview: Warning! May be harmful if swallowed, inhaled or absorbed through skin. Irritating to eyes, respiratory system and skin. May cause central nervous system depression.Routes of Exposure: Skin, Eyes, Ingestion.Potential Health EffectsIngestion: May be harmful if swallowed. May cause central nervous system effects. May cause gastrointestinal irritation, nausea, vomiting, and diarrhea. Non toxic.Skin contact: Uncured product contact will irritate lips, gums and tongue. May cause skin irritation. May be absorbed through skin and produce effects as listed under Ingestion.Inhalation: Causes mild respiratory tract irritation. Applies in uncured state. May be harmful if inhaled.Eye contact: Eye irritation on contact with the uncured product.Medical Conditions Aggravated: Pre-existing skin or respiratory diseases. |
| From MSDS:No information provided. |
| This product or one of its ingredients present at 0.1 percentor more is not listed as a carcinogen or suspected carcinogen by NTP, IARC, or OSHA. |
| Ingestion: Rinse mouth.Skin contact: To clean from skin, remove completely with a dry cloth or paper towel, before washing with detergent and water. Get medical attention if irritation persists.Inhalation: Move person to fresh air.Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. |
| 1 |
| 0 |
| 1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-29 |
| 2011-03-23 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| Use only in well-ventilated areas. Avoid contact with skin and eyes. Eye irritation on contact with the uncured product. Skin irritation is possible after contact with the uncured product. Caution! Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the fingertips, nails and cuticles. Residual sealant may remain on fingers for several days and transfer to lenses and cause severe eye irritation. Product releases acetic acid during application and curing.Store away from heat, sources of ignition, and incompatibles. |
| Disposal should be made in accordance with federal, state and local regulations. |
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
