 |
|
|
|
|
|
|
 |
|
|
|
Product Information
|
|---|
| GE Silicone II K-B Supreme, M90010, Almond |
| paste |
Home maintenance » silicone » Caulk
Home maintenance » plumbing » Caulk
Home maintenance » tile/tub » Caulk
|
| 866-275-4372 |
| 2011-03-29 |
| 2011-03-30 |
| Products with similar usage in this database |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
|
|
|
|
Health Effects
|
|
|---|
| Product releases acetic acid during application and curing. Use only in well-ventilated areas. Avoid contact with skin and eyes. Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the fingertips, nails and cuticles. Residual sealant may remain on fingers for several days and transfer to lenses and cause severe eye irritation.Store away from heat, sources of ignition, and incompatibles. Keep out of the reach of children. Keep container tightly closed. |
| From MSDS:Hazards IdentificationEmergency Overview: Warning! Irritating to eyes, respiratory system and skin. May be harmful if swallowed. Adverse liver and reproductive effects reported in animals.Routes of Exposure: Skin.Potential Health EffectsIngestion: May be harmful if swallowed.Skin contact: Uncured product contact will irritate lips, gums and tongue. Skin irritation is possible after contact with the uncured product.Inhalation: Inhalation of vapors may cause irritation of the respiratory tract. Applies in uncured state.Eye contact: Eye irritation is possible after contact with the uncured product.Medical Conditions Aggravated:None known. |
| From MSDS:No information provided. |
| This product or one of its ingredients present at 0.1 percentor more is not listed as a carcinogen or suspected carcinogen by NTP, IARC, or OSHA. |
| Ingestion: Do not induce vomiting. If victim is conscious, give 1-3 glasses of water to drink. Never give anything by mouth to an unconscious person. Get medical attention if irritation persists.Skin contact: To clean from skin, remove completely with a dry cloth or paper towel, before washing with detergent and water. If skin irritation persists, call a physician.Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If breathing is difficult give oxygen. Get medical attention.Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. |
| 1 |
| 0 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-29 |
| 2009-08-24 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| Product releases acetic acid during application and curing. Use only in well-ventilated areas. Avoid contact with skin and eyes. Remove contact lenses before using sealant. Do not handle lenses until all sealant has been cleaned from the fingertips, nails and cuticles. Residual sealant may remain on fingers for several days and transfer to lenses and cause severe eye irritation.Store away from heat, sources of ignition, and incompatibles. Keep out of the reach of children. Keep container tightly closed. |
| Disposal should be made in accordance with federal, state and local regulations. |
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
