 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Manufacturer
|
| Oatey |
| Hercules Chemical Company |
| 4700 West 160th Street |
| Cleveland |
| OH |
| 44135 |
| 216-267-7100 |
| 800-321-9535 |
| 800-321-9532 |
| 2012-06-20 |
| Products by this manufacturer |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
|
 |
 |
 |
|
Health Effects
|
|
| Do not use near flame source. To avoid over exposure, ensure ventilation by opening doors and windows. If adequate ventilation cannot be provided, wear a NIOSH approved respirator for organic solvents. In inhaled and headaches, dizziness or intoxication are experienced, get first aid and seek medical attention, if ill feeling persists. Wash thoroughly after use and before eating. If swallowed, DO NOT INDUCE VOMITING, call a physician or poison control center immediately. In case of eye and skin contact, immediately flush with water for 15 minutes and seek medical attention, if irritation persists. For more information, obtain a copy of the Material Safety Data Sheet from distribution. Long-term, repeated over exposure to solvents may cause damage to brain and nervous system, reproductive and respiratory system, mucous membranes, liver and kidneys. KEEP OUT OF REACH OF CHILDREN. |
| From MSDS:Inhalation: Vapors or mists may cause mucous membrane and respiratory irritation, coughing, headache, dizziness, dullness, nausea, shortness of breath and vomiting. High concentrations may cause central nervous system depression, narcosis and unconsciousness. May cause kidney, liver and lung damage. Skin: May cause irritation with redness, itching and pain. Methyl ethyl ketone and cyclohexanone may be absorbed through the skin causing effects similar to those listed under inhalation. Eye: Vapors may cause irritation. Direct contact may cause irritation with redness, stinging and tearing of the eyes. May cause eye damage. Ingestion: Swallowing may cause abdominal pain, nausea, vomiting and diarrhea. Aspiration during swallowing or vomiting can cause chemical pneumonia and lung damage. May cause kidney and liver damage. |
| From MSDS:Prolonged or repeated overexposure cause dermatitis and damage to the kidney, liver, lungs and central nervous system. |
| None of the components are listed as a carcinogen or suspect carcinogen by NTP, IARC or OSHA. |
| Skin: Remove contaminated clothing immediately. Wash all exposed areas with soap and water. Get medical attention if irritation develops. Remove dried cement with Oatey Plumber's Hand Cleaner or baby oil. Eyes: If material gets into eyes or if fumes cause irritation, immediately flush eyes with water for 15 minutes. If irritation persists, seek medical attention. Inhalation: If symptoms of exposure develop, remove to fresh air. If breathing becomes difficult, administer oxygen. Administer artificial respiration if breathing has stopped. Seek immediate medical attention. Ingestion: DO NOT INDUCE VOMITING. Rinse mouth with water. Never give anything by mouth to a person who is unconscious or drowsy. Get immediate medical attention by calling a Poison Control Center, or hospital emergency room. If medical advice cannot be obtained, then take the person and product to the nearest medical emergency treatment center or hospital. |
| 3 |
| 1 |
| 3 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2002-07-22 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists. Use with adequate ventilation (equivalent to outdoors). Wash thoroughly after handling. Do not eat, drink or smoke in the work area. Keep product away from heat, sparks, flames and all other sources of ignition. No smoking in storage or use areas. Keep containers closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible materials. Keep containers closed when not in use. Other: ***Empty*** containers retain product residue and can be hazardous. Follow all MSDS precautions in handling empty containers. Do not cut or weld on or near empty or full containers. |
| Dispose waste according to local, state and federal regulations. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|