 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Product Information
|
| Permatex Ultra Copper Maximum Temperature RTV Silicone Gasket Maker |
| paste |
Auto Products » gasket/sealant » Engine
Auto Products » gasket/sealant » Boat/Marine
|
| 877-376-2839 |
| 2011-03-27 |
| 2011-03-27 |
| Products with similar usage in this database |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
| Avoid contact with skin and eyes. Do not inhale vapors. Do not wear contact lenses.Store in a dry area below 90 degrees F. Keep container closed when not in use. Exposure to high temperatures may cause container to burst. |
| From MSDS:Hazards IdentificationToxicity: May cause eye and skin irritation. May irritate lips, gums, tongue, mouth, nose and throat. When this product if exposed to moisture, butanone oxime may be formed. Note: This product does not contain microcyrstalline silica.Primary Routes of Entry: Eye and skin contact, ingestion, inhalationPotential Health Effects2-Butanone oxime produced during cure is toxic and irritates eyes, nose and throat. Overexposure may cause eye and skin redness. Overexposure to nitrogen propellant (only released if can is punctured) may cause headache, drowsiness, dizziness, excitation, excess salivation, vomiting, unconsciousness.Medical Conditions Recognized as Being Aggravated by Exposure: None known. |
| From MSDS:None given. |
| Components listed by IARC. |
| Ingestion: Rinse mouth. If swallowed, DO NOT induce vomiting. Keep individual calm. Obtain medical attention.Inhalation: Move to fresh air in case of accidental inhalation of vapours. Obtain medical attention.Skin Contact: Wipe off material with paper towel or cloth. Wash off with soap and water. If skin irritation persists, call a physician.Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. |
| 1 |
| 1 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-27 |
| 2010-12-20 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Avoid contact with skin and eyes. Do not inhale vapors. Do not wear contact lenses.Store in a dry area below 90 degrees F. Keep container closed when not in use. Exposure to high temperatures may cause container to burst. |
| Disposal should be made in accordance with federal, state and local regulations. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|