 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Manufacturer
|
| Prestone Products Corp. |
| Div., Honeywell International, Inc. |
| 39 Old Ridgebury Road |
| Danbury |
| CT |
| 06811 |
| 203-830-7800 |
| 203-830-7904 |
| 800-890-2075 |
| 2012-06-20 |
| Products by this manufacturer |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
May cause mild transient eye irritation. Prolonged skin contact may cause irritation. Oil injection into the skin from highpressure hydraulic systems may cause severe injury. Seek medical attention immediately. Surgical removal may be necessary. Breathing high vapor concentrations may cause headache, dizziness, drowsiness or lung irritation. If the product is swallowed, aspiration may occur resulting in lipid pneumonitis.
|
From MSDS:
Hazards Identification
Emergency Overview
May cause mild transient eye irritation. Prolonged skin contact may cause irritation. Oil injection into the skin from highpressure hydraulic systems may cause severe injury. Seek medical attention immediately. Surgical removal may be necessary. Breathing high vapor concentrations may cause headache, dizziness, drowsiness or lung irritation. If the product is swallowed, aspiration may occur resulting in lipid pneumonitis.
Potential Health Effects
Inhalation: Inhalation of the product is unlikely with normal use. Prolonged exposure to mists or vapors in a poorly ventilated areas may result in dizziness, drowsiness, headache, nausea and in extreme cases, lipid pneumonitis.
Skin contact: Prolonged contact may cause mild irritation. High pressure injection of this product through the skin may cause possible extensive tissue damage resulting in loss of a finger, hand or arm. There may be no sign of initial injury or pain.
Eye contact: Direct eye contact may result in mild inflammation or irritation with redness, tearing, stinging and swelling.
Ingestion: Ingestion of this product is not expected to result in any acute systemic toxic effects. If more than several mouthfuls are swallowed, abdominal discomfort, headache, drowsiness, belching, nausea, vomiting and diarrhea may occur. If swallowed, aspiration into the lungs during ingestion or vomiting may result in lipid pneumonitis.
Medical conditions aggravated by exposure: Prolonged or repeated skin contact may aggravate an existing skin condition such as acne, seborrhea or dermatitis.
|
From MSDS:
Prolonged or repeated skin contact may remove skin oil, leading to possible skin irritation or dermatitis.
|
None of the components of this product present at greater than 0.1% are listed as carcinogens by OSHA, IARC, NTP or ACGIH.
|
Inhalation: If symptoms of exposure develop, remove to fresh air. If breathing becomes difficult, administer oxygen. Administer artificial respiration if breathing has stopped. Seek immediate medical attention.
Skin contact: Remove contaminated clothing. Wash all affected and exposed areas with soap and water. If skin irritation or redness develops and persists, seek medical attention. High pressure injection of this product through the skin is a medical emergency. This product must be removed completely from under the skin. Seek immediate medical attention.
Eye contact: Exposed eyes should be immediately flushed with copious amounts of water using a steady stream for a several minutes. If irritation, pain, swelling or tearing persist, seek medical attention.
Ingestion: If swallowed, get immediate medical attention by calling an emergency room or poison control center. Do not make the person vomit. If medical advice cannot be obtained, then take the person and product to the nearest medical emergency center or hospital. If vomiting occurs spontaneously, keep head below hips to prevent aspiration into the lungs. Never give anything by mouth to a person who is unconscious or drowsy.
Notes to Physician: There is no specific antidote. The petroleum oil and other ingredients in this product are unlikely to produce systemic symptoms following accidental ingestion. Upon ingestion, there is a slight risk of aspiration in the lungs which can lead to pneumonitis and non-cardiogenic pulmonary edema. Do not induce vomiting. If aspiration is suspected the patient should be observed for sign of lung injury. Treatment should be directed at the control of symptoms and clinical conditions. Subcutaneous or intramuscular injection requires prompt surgical debridement. There may be no signs of injury or pain initially. Failure to provide immediate treatment may result in extensive necrosis.
|
| 1 |
| 0 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-12-20 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
Avoid contact with the eyes. Avoid prolonged or repeated contact with skin and clothing. Avoid breathing vapors or mists. Use with adequate ventilation. Wash exposed skin with soap and water after use. Keep container away from excessive heat and open flames. Keep containers closed when not in use. Store in a cool, dry, well ventilated area. Empty containers retain product residue and may be hazardous. Do not cut, weld, drill, etc. containers, even empty. Do not reuse empty containers unless properly cleaned.
|
Dispose of product in accordance with all local, state/provincial and federal regulations.
|
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|