 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
|
|
|
Health Effects
|
|
|---|
| Wash thoroughly after handling. Avoid breathing vapor or mist. Avoid prolonged or repeated contact with skin. Use only in a well-ventilated area. Follow all MSDS/label precautions even after container is emptied because it may retain product residues.Do not store above 120 degrees F. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. |
| From MSDS: Hazards IdentificationEmergency Overview: Causes eye irritation. Causes skin irritation. May cause allergic skin reaction. Combustible liquid and vapor.Primary Routes of Exposure: Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact.Eye Contact: Substance causes severe eye irritation. Injury may be permanent.Skin Contact: May cause skin sensitization, an allergic reaction, which becomesevident on re-exposure to this material.Inhalation: High vapor concentrations are irritating to the eyes, nose, throat and lungs.Ingestion: Substance may be harmful if swallowed. |
| From MSDS:Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Effects of overexposure may include irritation of the nose and throat, irritation of the digestive tract and signs of nervous system depression (e.g., headache, drowsiness, loss of coordination and fatigue).. |
| Contains Titanium Dioxide. Titanium Dioxide is listed as a Group 2B- ***Possibly carcinogenic to humans*** by IARC. Significant exposure is not anticipated during brush application or drying. Risk of overexposure depends on duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of Titanium Dioxide in the formula. |
| Eye Contact: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Get medicalSkin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.Ingestion: If swallowed, do not induce vomiting. Give victim a glass of water or milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person. |
| 2* |
| 2 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-05 |
| 2007-11-02 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| Wash thoroughly after handling. Avoid breathing vapor or mist. Avoid prolonged or repeated contact with skin. Use only in a well-ventilated area. Follow all MSDS/label precautions even after container is emptied because it may retain product residues.Do not store above 120 degrees F. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. |
| Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow to enter storm drains or sewer systems. |
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
