 |
|
 |
 |
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
| Wash thoroughly after handling. Follow all MSDS/label precautions even after container is emptied because it may retain product residues. Avoid contact with eyes, skin and clothing. Use only in a well-ventilated area.Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame |
| From MSDS: Hazards IdentificationEmergency Overview: Causes eye irritation. Causes skin irritation. May cause allergic skin reaction..Primary Routes of Exposure: Skin Contact, Skin Absorption, Inhalation, Eye Contact.Eye Contact: Extremely irritating to the eyes and may cause severe damage, including blindness. Substance causes severe eye irritation. Injury may be permanent.Skin Contact: May cause skin sensitization, an allergic reaction, which becomes evident on re-exposure to this material.Inhalation: High vapor concentrations are irritating to the eyes, nose, throat and lungs.Ingestion: Substance may be harmful if swallowed. |
| From MSDS:Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. |
| Contains Titanium Dioxide. Titanium Dioxide is listed as a Group 2B- Possibly carcinogenic to humans by IARC. Significant exposure is not anticipated during brush application or drying. Risk of overexposure depends on duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of Titanium Dioxide in the formula. |
| Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention. Do not allow rubbing of eyes or or keeping eyes closed.Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.Ingestion: Swallowing less than an ounce will not cause significant harm. For larger amounts, do not induce vomiting, but give one or two glasses of water to drink and get medical attention. |
| 2 |
| 0 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2011-03-05 |
| 2010-04-01 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Wash thoroughly after handling. Follow all MSDS/label precautions even after container is emptied because it may retain product residues. Avoid contact with eyes, skin and clothing. Use only in a well-ventilated area.Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame |
| Dispose of material in accordance to local, state and federal regulations and ordinances. Do not allow to enter storm drains or sewer systems. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|