The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
US DOT Hazard Class: N/A KEEP AWAY FROM CHILDREN
Acute Health Effects:
From MSDS Route(s) of Entry:Inhalation? Yes Skin? Yes Ingestion? NoHealth Hazards (Acute and Chronic):May be irritating to eyes. XC may be irritating to skin in raw form. May be irritating if inhaled at close proximity. May be harmful if swallowed.Signs and Symptoms of Overexposure:Irritated skin or eyes, difficult breathing, dizziness.Medical Conditions Generally Aggravated by Exposure:Not established. Unnecessary exposure to this product or any industrial chemical should be avoided. Preexisting skin disorders or asthma may be aggravated by exposure.
Chronic Health Effects:
From MSDS Refer to Acute Health
NTP? N/A IARC Monographs? N/A OSHA Regulated? N/A
EYE CONTACT : Flush immediately with clean water for at least 15 minutes. Contact a physician as necessary.SKIN CONTACT : Remove any contaminated clothing or shoes. Wash affected areas thoroughly with soap and water for at least 15 minutes. Contact a physician if irritation persists. INHALATION : Remove from the exposure to fresh air. If breathing is difficult, see a physician and administer oxygen if available.INGESTION : Give water to dilute. Contact a physician or local poison control center immediately.
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard
MSDS Verified Date:
Precautions to be Taken in Storing and Handling: No special precautions in storing. Use protective equipment when handling undiluted material.Other Precautions:No special requirements other than the good industrial hygiene and safety practices employed with any industrial chemical.
Place material and absorbent into sealed containers and dispose of in accordance with current applicable laws and regulation.