 |
|
 |
 |
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
|
 |
 |
 |
|
Health Effects
|
|
| COMBUSTIBLE LIQUID AND VAPOR. VAPOR HARMFUL. Contains: Stoddard Solvent and Xylene CAUSES EYE, SKIN, NOSE AND THROAT IRRITATION Repeated and prolonged exposure to solvents may lead to permanent brain and nervous system damage. Eye watering, headaches, nausea, dizziness and loss of coordination are signs that solvent levels are too high. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Keep away from heat and flame. Use only with adequate ventilation. Do not breathe vapors, spray mist or sanding dust. Avoid contact with eyes and prolonged or repeated contact with skin. Wear eye protection and gloves. To avoid breathing vapors or spray mist, open window and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear a properly fitted vapor/particulate respirator approved by NIOSH for use with paints or leave the area. In all cases follow respirator manufacturer |
| From MSDS:PRIMARY ROUTE(S) OF ENTRY: DERMAL, INHALATION, INGESTION EFFECTS OF OVEREXPOSUREInhalation - Harmful if inhaled. May affect the brain or nervous system causing dizziness, headache or nausea.EYE Contact - Causes eye irritation. SKIN Contact - Causes skin irritation. Skin Absorption - Hazardous ingredients contained in this product have the capacity to be absorbed through the skin in sufficient quantities to cause systemic toxicity. Ingestion - Irritation of the digestive tract and nervous system depression (drowsiness, dizziness, loss of coordination and fatigue). Aspiration Hazard - This material can enter lungs during swallowing or vomiting and cause lung inflammation and damage. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: None expected when used in accordance with Safe Handling and Use Information. Note: This product contains pigments which may become a dust nuisance when removed by abrasive blasting, sanding, or grinding. |
| From MSDS:Reports have associated permanent brain and nervous system damage with repeated, prolonged overexposure to solvents among persons engaged in the painting trade. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. |
| Contains: Crystalline Silica which has been determined to be carcinogenic to humans (Group 1) by IARC when in respirable form. Risk of cancer depends on duration and level of inhalation exposure to dust from sanding the dried paint or spray mist. IARC has classified Ethyl Benzene as possibly carcinogenic for humans (Group 2B). IARC has classified Carbon Black as possibly carcinogenic for humans (Group 2B). This product may contain small amounts of materials known to the State of California to cause cancer. |
| 2 |
| 2 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2001-01-19 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
| Combustible - Keep away from heat and flame. Use only with adequate ventilation. Avoid prolonged contact with skin and breathing of vapor spray mist or sanding dust. Close container after each use. Keep out of reach of children. Do not take internally. |
| Conventional procedures in compliance with local, state and federal regulations. Do not incinerate sealed containers. |
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|