 |
|
 |
 |
|
 |
 |
 |
 |
 |
|
Manufacturer
|
| CRC Industries, Inc. |
| Div., Berwind Corp. |
| 885 Louis Drive |
| Warminster |
| PA |
| 18974 |
| 215-674-4300 |
| 215-674-2196 |
| 800-556-5074 |
| 2011-04-28 |
| Products by this manufacturer |
|
|
 |
 |
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
|
 |
 |
 |
|
Health Effects
|
|
| Eye and Skin Irritant |
From MSDS
Hazards Identification
Emergency Overview
Appearance & Odor: Yellow liquid, vanilla odor
Caution: Contents under Pressure.
Potential Health Effects:
EYE: May cause mild irritation to the eyes.
SKIN: No acute effects expected. However, prolonged contact may cause mild irritation.
INHALATION: Inhalation of spray mist may be irritating to the throat and respiratory system.
INGESTION: Generally non-toxic if ingested in small amount. May cause vomiting, diarrhea or gastrointestinal discomfort.
|
From MSDS
No data.
|
From MSDS
Carcinogenicity: OSHA: No; IARC: No; NTP: No.
|
From MSDS
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap and water. Call a physician if irritation persists. Wash contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If breathing is difficult give oxygen. Call a physician.
Ingestion: If swallowed, DO NOT induce vomiting. Give victim a glass of water. If severe symptoms develop, get medical attention immediately.
|
| 1 |
| 0 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2006-03-07 |
|
|
 |
 |
 |
 |
 |
|
Handling/Disposal
|
From MSDS
Avoid contact with eyes, skin and clothing. Replace container lid when not in use. Properly clean any spilled residue with a wet cloth. Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120 F to prevent cans from rupturing.
|
From MSDS
This material is not a RCRA hazardous waste. (See 40 CFR Part 261.20 – 261.33) Aerosol containers should be emptied and depressurized before disposal. Empty containers may be recycled. Any liquids should be collected and properly dispo
|
|
|
 |
 |
 |
 |
 |
|
Ingredients from MSDS/Label
|
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|