The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
(Complete MSDS for this product)
MSDS: OTHER PRECAUTIONS: Do not get in eyes. Avoid skin contact. Prevent prolonged or repeated breathing of
vapors or spray mists. Do not handle until the manufacturer
Acute Health Effects:
Route(s) of Entry: N/A
EFFECTS OF OVEREXPOSURE: Inhalation: Vapors or spray mists may be slightly irritating to eye, nose, throat, and mucous membranes
of respiratory tract producing symptoms of headache, nausea in poorly ventilated areas. Skin Contact: Prolonged or repeated contact
with coating may cause slight skin irritation. Eye Contact: Direct contact; inconsequential eye irritation.
Chronic Health Effects:
Health Hazards (Acute and Chronic): N/A
*NOTE: These products contain this toxic chemical subject to the reporting requirements of Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 and of 40 CFR 372.
Inhalation: Remove to fresh air. Eye and Skin Contact: Immediately flush eyes with plenty
of water for at least 15 minutes and consult physician; wash skin thoroughly with soap and water. If drenched, remove and wash
clothing before reuse. Ingestion: If victim is conscious, give 2 glasses of water. Call a physician.
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Maximum storage temperature 100
The coating and any contaminated diking material should be thoroughly air dried
and collected into drums. The drums should then be sealed and properly labeled with waste designation and
disposed of in a landfill or incinerated according to current local, state and federal regulations.