 |
|
|
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the Material Safety Data Sheet (MSDS) prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the MSDS. (What is an MSDS?)
|
 |
|
|
|
Health Effects
|
|
|---|
| CAUTION: INITIALLY THERE MAY BE A POTENT, ADVERSE IMPACE ON THE INDOOR AIR QUALITY WITHIN THE GENERAL WORK AREA DURING THE INSTALLATION PROCESS. Adequate ventilation of the work area should be maintained during the installation process, without causing the entry of contaminates to other parts of building and persons who are sensitive to odors and/or chemicals should avoid the work area. CAUTION: Avoid eye and skin contact If eye contact occurs, flush with water for 15 minutes and call a physician. Use positive fresh air cross ventilation. Do not take internally: If swallowed, do not induce vomiting. Call a physician immediately. Wash skin thoroughly after using. Close container after each use. KEEP OUT OF REACH OF CHILDREN. NOTE: Do not reuse container. Dispose of container and adhesive residue in accordance with federal, state and local waste disposal regulations. Do not flush adhesive down drains. WARNING. Do not sand, dry scrape, beadblast or mechanically pulverize in pl. resilient flooring, backing or lining felt. These products may contain either asbestos fibers or crystalline silica. Cancer and respiratory tract hazard if inhaled. Avoid creating dust. Smoking by individuals who have been exposed to asbestos fibers greatly increase the risk of severe bodily harm. For removal instructions; refer to the Resilient Floor Covering Institute's Recommended Work Practices for Removal of Resilient Floor Coverings. These are a defined set of instructions addressed to the task of removing all resilient floor covering structures. Read carefully the complete Material Safety Data Sheet. Bar Code: 0-81833-81640-2 |
From MSDS
Inhalation: Breathing high concentrations of vapors may cause nausea and irritation of the nose throat and respiratory tract.
Eye Contact: Direct contact with the product or exposure to vapors may cause severe tearing and stinging.
Skin Contact: Prolonged or repeated contact may cause severe redness, itching and inflammation. May cause allergic reactions.
Ingestion: May cause nausea, vomiting and diarrhea.
Medical Conditions Generally Aggravated by Exposure: Preexisting eye, skin and respiratory disorders.
|
From MSDS
None reported.
|
From MSDS
Not identified as a carcinogen by NTP, IARC or OSHA.
|
| N |
| N |
| N |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 1994-02-01 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
From MSDS
Use with adequate ventilation. Open doors and windows, and use other means to assure fresh air entry and exhaust sufficient to maintain exposure below PEL/TLV. Avoid extreme heat or cold.
|
From MSDS
Dispose of in accordance with applicable federal, state, and local regulations. Do not flush adhesive down drains.
|
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
