Skip Navigation

Household Products Database banner

Quick search

Advanced Search triangular bullet

Browse by category
Inside the Home
Home Maintenance
Personal Care
Arts & Crafts
Pet Care
Auto Products
Home Office
Commercial / Institutional

Browse A to Z
Products Names
Types of Products

Support pages
About the Database
Product Recalls
Contact Us
More Resources



Home Products Manufacturers Ingredients Health Effects
Product Information
Product Name: Johns Manville Insul-SHIELD Faced Insulation Board-01/05/2006
Form: solid
Product Category: Home maintenance » building » Insulation
Home maintenance » wall/ceiling » Insulation
Customer Service: 303-978-2000
Date Entered: 2006-04-05
Related Items: Products with similar usage in this database
Manufacturer: Johns Manville Insulation Group
Address: P.O. Box 5108
City: Denver
State: CO
Zip Code: 80127
Telephone Number: 303-978-2000
Toll Free Number: 800-654-3103
Date Info Verified: 2017-02-28
Related Items: Products by this manufacturer
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the (Material) Safety Data Sheet, (M)SDS, prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the (M)SDS. (What is an (M)SDS?) (Complete (M)SDS for this product)
Health Effects
Enter text or highlight term...
Acute Health Effects: From MSDS
Breathing dust from this product may cause a scratchy throat, congestion, and slight coughing. Getting dust or fibers on the skin, or in the eyes may cause itching, rash, or redness.
Target Organs: Nose (nasal passages), throat, lungs, skin, eyes.
Primary Routes of Entry (Exposure): Inhalation (breathing dust), skin, and eye contact.
Potential Health Effects
Inhalation: Irritation of the upper respiratory tract (scratchy throat), coughing, and congestion may occur in extreme exposures.
Skin: Temporary irritation (itching) or redness may occur.
Ingestion: This product is not intended to be ingested (eaten). If ingested, it may cause temporary irritation to the gastrointestinal (digestive) tract.
Eyes: Temporary irritation (itching) or redness may occur.
Ears: Temporary irritation (itching) or redness may occur.
Medical Conditions Aggravated by Exposure:
Pre-existing chronic respiratory, skin, or eye diseases or conditions.
Chronic Health Effects: From MSDS
Refer to section on Carcinogenicity.
Carcinogenicity: From MSDS
Component Carcinogenicity
Fiber glass wool (65997-17-3)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
NTP: Reasonably Anticipated To Be A Carcinogen (respirable size)
IARC: Group 3 - Not Classifiable (IARC Monograph 43, 1988; Monograph 81, 2002)
Carbon black (1333-86-4)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 65, 1996)
Antimony trioxide (may be in facing or adhesive) (1309-64-4)
ACGIH: A2 - Suspected Human Carcinogen (production)
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 47, 1989)
Chronic Toxicity
Antimony trioxide causes pneumoconiosis in humans. Antimony trioxide was tested for carcinogenicity by inhalation exposure in male and female rats. Evidence for pulmonary cancer in the rat studies was inconsistent. In the earlier studies, rats were exposed to extremely high dose levels; exposed female rats, but not males, had an increased cancer incidence. However, in later studies using more advanced techniques, the rats did not show increased cancers. USEPA and CAL EPA concluded that these studies are inadequate for use in quantitative cancer risk assessment. According to US EPA's recently proposed cancer risk assessment guidance, a margin of exposure (MOE) analysis is more appropriate when, as with antimony trioxide, the carcinogenicity of a chemical may be a secondary effect of toxicity or of an induced physiological change. The MOE approach was adopted after conferring with CAL EPA scientists involved in the Proposition 65 program who suggested using US EPA's Proposed Guidance for Carcinogen Risk Assessment. An independent laboratory conducted a risk analysis using the MOE approach; the results indicated that the potential levels of exposure to antimony trioxide in JM products pose no significant cancer risk to the end-user of these products.
MSDS Date: 2008-04-16
Handling: From MSDS
Use protective equipment (see below) when handling uncontained material.
Storage Procedures
Warehouse storage should be in accordance with package directions, if any. Material should be kept dry, and protected from the elements.
Personal Protective Equipment:
Personal Protective Equipment: Eyes/Face
Safety glasses with side shields are recommended to keep dust out of the eyes.
Personal Protective Equipment: Skin
Leather or cotton gloves should be worn to prevent skin contact and irritation. Barrier creams may also be used to reduce skin contact and irritation caused by fiber glass.
Personal Protective Equipment: Respiratory
A respirator should be used if ventilation is unavailable, or is inadequate for keeping dust and fiber levels below the applicable exposure limits. In those cases, use a NIOSH-certified disposable or reusable particulate respirator with an efficiency rating of N95 or higher (under 42 CFR 84) when working with this product. For exposures up to five times the established exposure limits use a quarter-mask respirator, rated N95 or higher; and for exposures up to ten times the established exposure limits use a half-mask respirator (e.g., MSA's DM-11, Racal's Delta N95, 3M's 8210), rated N95 or higher. Operations such as sawing, blowing, tear out, and spraying may generate airborne fiber concentrations requiring a higher level of respiratory protection. For exposures up to 50 times the established exposure limits use a full-face respirator, rated N99 or higher.
Personal Protective Equipment: General
Wear a cap, a loose-fitting, long-sleeved shirt and long pants to protect skin from irritation. Exposed skin areas should be washed with soap and warm water after handling or working with fiber glass. Clothing should be washed separately from other clothes, and the washer should be rinsed thoroughly (run empty for a complete wash cycle). This will reduce the chances of
fiber glass being transferred to other clothing.
Disposal: From MSDS
This product, as supplied, is not regulated as a hazardous waste by the U.S. Environmental Protection Agency (EPA) under Resource Conservation and Recovery Act (RCRA) regulations. Comply with state and local regulations for disposal. If you a
Ingredients from (M)SDS/Label
ChemicalCAS No / Unique IDPercent
Foil facing000000-72-30-6.7
Antimony trioxide001309-64-4>0.1
Carbon black001333-86-4<1
Urea, polymer with formaldehyde and phenol025104-55-60-15
Acrylic resin(s) (unspecified)999999-59-40-15
(Complete (M)SDS for this product)
HHS.GOV Household Products Database Home Page National Institutes of Health National Library of Medicine Specialized Information Services National Library of Medicine