 |
|
 |
 |
|
 |
 |
 |
 |
 |
Product Information
|
Loctite PL Premium Fast Grab-12/18/2014 |
paste |
Commercial / Institutional » building construction » Adhesive
Home maintenance » construction » Adhesive
Home maintenance » multipurpose » Adhesive
|
800-321-1733 |
2015-01-09 |
Products with similar usage in this database |
|
|
 |
 |
 |
 |
 |
Manufacturer
|
Henkel Consumer Adhesives |
Div., The Henkel Group |
7405 Production Drive |
Mentor |
OH |
44060 |
440-255-8900 |
800-624-7767 |
2019-01-15 |
Products by this manufacturer |
|
|
 |
 |
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the (Material) Safety Data Sheet, (M)SDS, prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the (M)SDS. (What is an (M)SDS?)
(Complete (M)SDS for this product)
|
 |
 |
 |
Health Effects
|
|
Warning: harmful if inhaled. Eye, skin and respiratory irritant. May cause skin and respiratory sensitization.
WARNING: Contains methylene diisocyanate (MDI). Individuals with lung or breathing problems or prior sensitization to isocyanates should not use this product. Avoid breathing vapors. Avoid contact with eyes and skin. Prolonged or repeated exposure may cause dermal or respiratory sensitization, effects may be permanent. Gloves recommended.
DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
|
From MSDS:
Hazards Identification
Emergency Overview: May cause allergic skin and respiratory reaction. Causes eye, skin and respiratory tract irritation. Harmful if inhaled.
Potential Health Effects
Relevant routes of exposure: Eyes, Inhalation, Skin.
Eye Contact: Causes eye irritation.
Skin Contact: Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals. This product may discolor the skin.
Inhalation: Contains crystalline silica (quartz), which is classified as a possible carcinogen. However, the crystalline silica present in this product is encapsulated in the liquid and will only be liberated if the product is sanded or abraded, and even then what is liberated will not be pure crystalline silica. Appropriate precautions, however, should be taken if the product is sanded or abraded to prevent personnel from breathing the dust. May cause allergic skin and respiratory tract reaction. Moderate respiratory tract irritation. Exposure to diisocyanates may cause the following human health effects: Skin irritation and allergic reactions, respiratory irritation, respiratory sensitization and lung toxicity; some diisocyanates also may cause cancer. The likelihood that these effects will occur depends on a number of factors; among them the level of exposure, frequency of exposure, part of body exposed and sensitivity of the exposed individual. Persons suffering from allergic reactions to isocyanates should avoid contact with the product.
Ingestion: Do not taste or swallow.
Existing conditions aggravated by exposure: Pre-existing skin or lung allergies may increase the chance of developing exaggerated allergic symptoms from exposure to this product.
|
From MSDS:
No information provided.
|
Listed by IARC Group 1: Quartz
Listed by IARC Group 2B: Titanium Dioxide
Listed by NTP: Quartz
|
Eye Contact: In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Skin Contact: Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes.
Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Persons suffering from allergic reactions to isocyanates should avoid contact with the product.
Ingestion: Do not induce vomiting, seek medical advice immediately.
Notes to Physician: There is no specific antidote.An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate.Treatment based on judgement of the physician in response to reactions of the patient.
|
2* |
1 |
1 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe; N = No information provided by manufacturer; * = Chronic Health Hazard |
2014-12-18 |
|
|
 |
 |
 |
 |
 |
Handling/Disposal
|
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Avoid spraying/aerosol generation. Avoid extreme temperatures. Protect from moisture. Use only with adequate ventilation. Keep out of the reach of children. For safe storage, store between 20 deg C (68 deg F) and 40 deg C (104 deg F). Below temperature limit the product properties will change. Keep closed in a cool, dry area. Store away from heat, sparks, flames, or other sources of ignition. |
Follow all local, state, federal and provincial regulations for disposal. |
|
|
 |
 |
 |
 |
 |
Ingredients from (M)SDS/Label
|
|
|
 |
 |
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
 |
|