Skip Navigation

Household Products Database banner

Quick search

Advanced Search triangular bullet

Browse by category
Inside the Home
Home Maintenance
Personal Care
Arts & Crafts
Pet Care
Auto Products
Home Office
Commercial / Institutional

Browse A to Z
Products Names
Types of Products

Support pages
About the Database
Product Recalls
Contact Us
More Resources



Home Products Manufacturers Ingredients Health Effects
Product Information
Product Name: Locktite Tite Foam Insulating Foam Sealant-09/01/2016
Form: aerosol
Product Category: Home maintenance » polyurethane spray foam » Insulation
Home maintenance » insulation » Foam
Home maintenance » foam » Crack filler
Home maintenance » sealant » Window
Customer Service: 800-321-1733
Date Entered: 2016-09-14
Related Items: Products with similar usage in this database
Manufacturer: Henkel Consumer Adhesives
Div., The Henkel Group
Address: 7405 Production Drive
City: Mentor
State: OH
Zip Code: 44060
Telephone Number: 440-255-8900
Toll Free Number: 800-624-7767
Date Info Verified: 2019-01-15
Related Items: Products by this manufacturer
The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the (Material) Safety Data Sheet, (M)SDS, prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the (M)SDS. (What is an (M)SDS?) (Complete (M)SDS for this product)
Health Effects
Enter text or highlight term...
Warnings: Hazard Statements

Danger: Contents under pressure. Extremely flammable aerosol. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Precautionary Statements


Keep away from heat, sparks, open flames, hot surfaces - no smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing mist or spray. Wash affected area thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, eye protection, and face protection. In case of inadequate ventilation wear respiratory protection.


IF ON SKIN: Wash with plenty of water. Take off contaminated clothing.

IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical attention. If eye irritation persists: Get medical attention. If experiencing respiratory symptoms: Call a poison center or physician.


Protect from sunlight. Do not expose to temperatures exceeding 50 deg C/122 deg F.


Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
Acute Health Effects: From SDS:

Hazards Identification

Danger: Contents under pressure. Extremely flammable aerosol. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled.

Potential Health Effects

Relevant routes of exposure: Inhalation. Ingestion. Skin.

Eye contact: Contact with eyes can cause eye irritation.

Skin contact: Persons suffering from allergic reactions to isocyanates should avoid contact with the product. Prolonged or repeated skin contact may cause skin irritation or allergic skin sensitization reaction. This product may discolor the skin. Cured material is difficult to remove.

Inhalation: Inhalation of mist or spray may be harmful. As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization (chemical asthma) which will cause them to react to a later exposure to isocyanate at levels well below the TLV.

Ingestion: Can cause irritation of mucous membranes. Nausea.
Chronic Health Effects: From SDS:

Chronic overexposure to isocyanates has been reported to cause lung damage. These symptoms, which can include chest tightness, wheezing, cough, shortness of breath or asthma attack, could be immediate or delayed (up to several hours after expos
Carcinogenicity: Not listed by IARC, NTP and OSHA.
First Aid: Eye contact: Flush eyes with plenty of water for at least 5 minutes. If irritation persists seek medical attention.

Skin contact: Fresh foam : Wipe off affected skin area immediately with a soft cloth and then remove residues with vegetable oil; apply skin care product. Cured foam can be removed only mechanically. Immediately wash skin thoroughly with soap and water. Remove contaminated clothes.

Inhalation: If inhaled, immediately remove the affected person to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.

Ingestion: Do not induce vomiting, seek medical advice immediately.
MSDS Date: 2016-09-01
Handling: Keep away from heat, spark and flame. Do not puncture or incinerate pressurized containers. Ensure adequate ventilation, especially in confined areas. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep out of the reach of children. When using do not eat, drink or smoke. Wear suitable protective clothing, gloves and eye/face protection. Store between 50 deg F and 80 deg F. (10 deg and 27 deg C) Store away from heat, sparks, flames, or other sources of ignition. Do not store above 49 deg C (120 deg F). Do not cut or weld container.
Disposal: Dispose of according to Federal, State and local governmental regulations. Hazardous waste number: It is the responsibility of the user to determine if an item is hazardous as defined in the Resource Conservation and Recovery Act (RCRA) at the time of disposal. Product uses, transformations, mixtures, processes, etc., may render the resulting material hazardous, under the criteria of ignitability, corrosivity, reactivity and toxicity characteristics of the Toxicity Characteristics Leaching Procedure (TCLP) 40 CFR 261.20-24.
Ingredients from (M)SDS/Label
ChemicalCAS No / Unique IDPercent
Dimethyl ether000115-10-610.0-30.0
Urethane prepolymer Diphenylmethane-diisocyanate026447-40-50.1-1.0
(Complete (M)SDS for this product)
HHS.GOV Household Products Database Home Page National Library of Medicine