 |
|
|
|
|
|
|
 |
|
|
|
Manufacturer
|
|---|
| Bonsal American |
| Oldcastle Company |
| 8201 Arrowridge Boulevard |
| Charlotte |
| NC |
| 28273 |
| 704-525-1621 |
| 704-529-5261 |
| 800-738-1621 |
| 2016-02-10 |
| Products by this manufacturer |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the (Material) Safety Data Sheet, (M)SDS, prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the (M)SDS. (What is an (M)SDS?)
(Complete (M)SDS for this product)
|
|
|
|
|
Health Effects
|
|
|---|
Sakrete Fast Setting Cement Patcher is a cementitious powder blend. When in contact with moisture in eyes or on skin, or when mixed with water, it becomes highly caustic (pH > 12) and will damage or burn (as severely as third-degree) the eyes or skin. Inhalation may cause irritation to the moist mucous membranes of the nose, throat and upper respiratory system or may cause or may aggravate certain lung diseases or conditions.
?
|
From MSDS:
Hazards Identification
Sakrete Fast Setting Cement Patcher is a cementitious powder blend. When in contact with moisture in eyes or on skin, or when mixed with water, it becomes highly caustic (pH > 12) and will damage or burn (as severely as third-degree) the eyes or skin. Inhalation may cause irritation to the moist mucous membranes of the nose, throat and upper respiratory system or may cause or may aggravate certain lung diseases or conditions.
Potential Health Hazards
Potential health effects may vary depending upon the duration and degree of exposure.
Eye contact: Exposure to airborne dust may cause immediate or delayed irritation or inflammation of the cornea. Eye contact by larger amounts of dry powder or splashes of wet product may cause effects ranging from moderate eye irritation to chemical burns and blindness.
Eye contact: Exposure to dry produt may cause drying of the skin with consequent mild irritation or more significant effects attributable to aggravation of other conditions. Discomfort or pain cannot be relied upon to alert a person to a hazardous skin exposure.
Skin contactSome individuals may exhibit an allergic response upon exposure to product. The response may appear in a variety of forms ranging from a mild rash to severe skin ulcers.
Inhalation: Exposure to product may cause irritation to the moist mucous membranes of the nose, throat and upper respiratory system. Pre-existing upper respiratory and lung diseases may be aggravated by inhalation.
Ingestion: Internal discomfort or ill effects are possible if large quantities are swallowed.
|
From MSDS:
Dry product coming in contact with wet skin or exposure to wet product may cause more severe skin effects, including thickening, cracking or fissuring of the skin. Prolonged exposure can cause severe skin damage in the form of chemical (caust
|
| Cement Patcher is not recognized as a carcinogen by NTP, OSHA, or IARC. However, it may contain trace amounts of heavy metals recognized as carcinogens by these organizations. In addition, it also contains crystalline silica which IARC classifies as a kno |
Eye contact: Immediately flush eye thoroughly with water. Continue flushing eye for at least 15 minutes, including under lids, to remove all particles. Call physician immediately.
Skin contact: Wash skin with cool water and pH-neutral soap or a mild detergent. Seek medical treatment if irritation or inflammation develops or persists. Seek immediate medical treatment in the event of burns.
Inhalation:Remove person to fresh air. If breathing is difficult, administer oxygen. If not breathing, give artificial respiration. Seek medical help if coughing and other symptoms do not subside. Inhalation of large amounts of product requires immediate medical attention.
Ingestion: Do not induce vomiting. If conscious, have the victim drink plenty of water and call a physician immediately.
|
| 2009-09-30 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| Keep dry until used. Handle and store in a manner so that airborne dust does not exceed applicable exposure limits. Use adequate ventilation and dust collection. |
| DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY OF WATER. All disposal methods must be in compliance with all Federal, State/ Provincial and local laws and regulations. Regulations may vary in different locations. Waste characterizations and compliance with applicable laws are the responsibility solely of the waste generator. |
|
|
|
|
|
|
|
|
Ingredients from MSDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
