 |
|
|
|
|
|
|
 |
|
|
|
Product Information
|
|---|
| DAP Kwik Foam Polyurethane Insulating Foam, Aerosol-06/19/2015 |
| aerosol |
Home maintenance » sealant » Window
Home maintenance » polyurethane spray foam » Insulation
Home maintenance » insulation » Foam
Home maintenance » foam » Crack filler
|
| 888-327-8477 |
| 2016-09-14 |
| Products with similar usage in this database |
|
|
|
|
| The following information (Health Effects, Handling/Disposal, and Ingredients) is taken from the product label and/or the (Material) Safety Data Sheet, (M)SDS, prepared by the manufacturer. The National Library of Medicine does not test products nor does it evaluate information from the product label or the (M)SDS. (What is an (M)SDS?)
(Complete (M)SDS for this product)
|
|
|
|
|
Health Effects
|
|
|---|
Hazard Statements
Danger. Extremely flammable gas. Extremely flammable aerosol. Contains gas under pressure; may explode if heated. May cause an allergic skin reaction. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Suspected of causing cancer. Classified as Category 2 based on limited evidence on human and/or animal studies. Mixtures with concentrations of suspected carcinogens ingredients at concentration present between 0.1 percent and 1.0 percent labelling the SDS will be optional depending on authorities. lf Category 2 carcinogenic present at a concentration of 1 percent or above labelling the SDS will be expected. Routes of exposure are dependent on ingredient form. May cause harm to breast-fed children.
Precautionary Statements
Prevention
0btain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Do not breathe dust fume/gas/mist vapours/spray. Avoid contact during pregnancy/while nursing. Wear protective gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required. ln case of inadequate ventilation wear respiratory protection Response
IF ON SKlN:Wash with plenty of soap and water. lf skin irritation or rash occurs: Get medical advice/attention. lF lNHALED: lf breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. lf experiencing respiratory symptoms: Call a POlSON CENTER or doctor/physician lF exposed or concerned: Get medical advice/attention. Call a POlSON CENTER or doctor/physician if you feel unwell. lf eye irritation persists: Eliminate all ignition sources if safe to do so
Storage
Protect from sunlight. Store in a well-ventilated place. Do no expose to temperatures exceeding 50 deg C/ 122 deg F.
Disposal
None.
|
From SDS:
Hazards Identification
Emergency Overview
DANGER! Extremely flammable liquid and vapor Vapors may cause flash fire or explosion Vapors canform an ignitable mixture with air Vapors can flow along surfaces to a distant ignition source and flash back. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Keep container closed and away from heat, sparks, and open flame. Store away from caustics and oxidizers. May cause nausea, headaches, and dizziness. May cause eye, skin, nose, throat and respiratory tract irritation. Use only with adequate ventilation Prevent build-up of vapors by opening all windows and doors to a achieve cross-ventilation. May cause sensitization by inhalation and skin contact. Contents under pressure. Do not puncture can. Exposure to temperatures above 120 deg F may cause can to rupture. The primary adverse health effects of this product are related to the Polymeric lsocyanate (MDl) component. Therefore, adequate ventilation should be provided to avoid exceeding the exposure limits of these components. The likelihood of exceeding these limits are low due to the low concentration of vapor produced during normal use However, if used indoors, mechanical ventilation or exhaust should be provided during use and until product is cured This product has strong adhesive-like characteristics and will adhere aggressively to skin and other surfaces lf accidental contact occurs, follow the appropriate first-aid procedure described . MDl vapor can irritate the respiratory tract causing runny nose, sore throat, coughing and reduce lung function.
Potential Health Effects
Routes of Exposure: Eye Contact, Ingestion, Inhalation, Skin Contact
Eye Contact: Direct eye contact may cause irritation. Mist and vapors may cause eye irritation. Foam contact can cause physical damage due to adhesive character.
Skin Contact: May cause sensitization by skin contact. May cause localized irritation, reddening or swelling. Prolonged or repeated exposure may lead to sensitization and/or contact dermatitis. This product has strong adhesive-like characteristics and will adhere aggressively to skin and other surfaces. If accidental contact occurs, follow the appropriate first-aid procedure.
Inhalation: Vapors may be irritating to eyes, nose, throat, and lungs. Inhalation of high concentrations may cause headache, nausea, and dizziness.
Ingestion: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.
|
From SDS:
No information.
|
| No Information. |
Eye Contact: In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.
Skin Contact: Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical attention.
Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
Ingestion: If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
|
| 2 |
| 4 |
| 0 |
0 = Minimal; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe;
N = No information provided by manufacturer; * = Chronic Health Hazard |
| 2015-06-19 |
|
|
|
|
|
|
|
|
Handling/Disposal
|
|---|
| KEEP OUT OF REACH OF CHILDREN!DO NOT TAKE INTERNALLY. Remove all sources of ignition. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Provide adequate ventilation. Avoid heat, sparks and open flames. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Wash thoroughly after handling. Contains isocyanates. See information supplied by the manufacturer. Persons allergic to isocyanates, and particularly those suffering from asthma or other respiratory conditions, should not work with isocyanates. Store away from sources of ignition and heat. Protect material from direct sunlight. Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store at temperatures above 120 degrees F. Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. |
| Residues and spilled material are hazardous waste due to ignitability. Contents under pressure. Dispose of material in accordance with all federal, state and local regulations. State and Local regulations/restrictions are complex and may differ from Federal regulations. Responsibility for proper waste disposal is with the owner of the waste. Liquids cannot be disposed of in a landfill. Do not flush into surface water or sanitary sewer system. Do not empty into drains. Do not re-use empty containers. The container for this product can present explosion or fire hazards, even when emptied. To avoid risk of injury, do not cut, puncture, or weld on or near this container. Before disposing of containers, relieve container of any remaining product and pressure. Empty cylinders, once relieved of all pressure, can be disposed of as non-hazardous waste. |
|
|
|
|
|
|
|
|
Ingredients from (M)SDS/Label
|
|---|
|
|
|
|
|
|
|
|
|
Home
| Brands | Manufacturers
| Ingredients | Health
Effects
|
|
